Honda HRU19M2PKU Lawn Mower Manual

The Honda HRU19M2PKU is a high-performance lawn mower designed for residential use. It features a powerful engine, adjustable cutting heights, and a durable build to ensure a clean and efficient cut. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 19-inch cutting deck, adjustable cutting heights, easy-start engine, ergonomic handle, and grass catcher.

Installation

Unpack the mower and check for all components. Assemble the handle and attach the grass catcher.

1. Attach the handle: Align and secure with provided screws.
2. Install the grass catcher: Hook onto the rear of the mower.
3. Check oil level: Ensure proper oil is filled before starting.
4. Fill with fuel: Use unleaded gasoline for optimal performance.

WARNING! Always follow safety precautions when handling fuel and oil.

First-Time Setup

Before starting the mower, ensure all components are securely attached and check the oil and fuel levels.

1. Check the oil: Use the dipstick to ensure proper oil level.
2. Fill the fuel tank: Use fresh unleaded gasoline.
3. Adjust the cutting height: Set to desired level based on grass length.
4. Start the mower: Follow the starting instructions in the manual.

CAUTION! Ensure the area is clear of debris before mowing.

Specifications

• Engine: Honda GCV160, 4-stroke, air-cooled.
• Cutting Width: 19 inches.
• Cutting Heights: 6 positions (1 inch to 4 inches).
• Grass Catcher Capacity: 16 gallons.
• Weight: 80 lbs.
• Fuel Tank Capacity: 0.9 gallons.
• Noise Level: 98 dB.

Controls and Settings

Access the mower controls easily from the handle. Key controls include the throttle, choke, and start/stop switch.

Throttle: Adjusts engine speed for optimal performance.

Choke: Used for starting the engine in cold conditions.

Start/Stop Switch: Easily accessible for quick operation.

Connecting Devices

This section is not applicable for lawn mowers.

Operating the Mower

Follow these steps to operate the mower effectively.

1. Start the mower: Engage the throttle and pull the starter cord.
2. Begin mowing: Walk at a steady pace, guiding the mower.
3. Adjust speed as needed: Use the throttle for different grass conditions.
4. Empty the grass catcher when full: Ensure the mower is off before removing.

WARNING! Do not operate on wet grass to avoid slipping.

Maintenance and Care

Regular maintenance is essential for optimal performance and longevity.

1. Check oil level regularly: Change oil every 50 hours of use.
2. Clean the air filter: Replace or clean as needed.
3. Sharpen the blades: Keep blades sharp for a clean cut.
4. Inspect for wear: Check belts and cables for any signs of damage.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Always follow safety guidelines to prevent accidents.

• Wear appropriate footwear and eye protection.
• Keep children and pets away while mowing.
• Do not operate in wet conditions.
• Read the manual thoroughly before use.

Troubleshooting

Reset: Refer to the manual for reset procedures if applicable.

Service: Contact Honda support for further assistance.